Harshal Oza Toolkit
Engineering tools for supported Siemens NX workflows
Every tool below is listed with the status it actually has today. A tool is only marked available when a customer can install and use it from the current release.
Read this before buying for a specific tool
NX Backup and Restore
Save your NX settings to one encrypted file and restore them later.
Installable from the current release.
Learn moreShow less
Backs up everything NX keeps for you — toolbars, roles, templates and preferences — for the NX versions you choose, into a single file compressed and encrypted with a password you set. Restore it after reinstalling Windows or NX. Before restoring, your current settings are kept beside the originals so a restore can be undone.
Installation note: Built into the Windows application and opened from the Install Tools page. Free, and works without a licence: it never contacts the licence server.
NX 12 Classic Toolbar
Restores the classic toolbar interface in NX 12.
Installable from the current release.
Learn moreShow less
Re-enables the classic toolbar layout in NX 12.0. It is installed by the Install Tools page of the application into the NX program directory, where NX loads it at start-up.
Installation note: Installed from the Install Tools page. Windows will ask for administrator rights, and NX must be fully closed during installation.
RenameCAMops
Bulk-rename CAM operations inside NX without editing them one at a time.
Installable from the current release.
Learn moreShow less
An NX add-in that renames CAM operations in bulk instead of one at a time. It is installed by the Install Tools page of the application, which detects your NX installations and puts the add-in where NX will load it.
Installation note: Installed from the Install Tools page into each NX installation you choose. Windows will ask for administrator rights, and NX must be closed during installation.
Material Size BOM
Material size bill of materials from NX, exported to Excel.
Installable from the current release.
Learn moreShow less
An NX add-in that produces a material size bill of materials and exports it to Excel. Installing it adds a Material Size button in the NX Manufacturing application.
Installation note: Installed from the Install Tools page into each NX installation you choose. Windows will ask for administrator rights, and NX must be closed during installation.
Sheet Up Sheet
Setup-sheet output for NX CAM programs.
Installable from the current release.
Learn moreShow less
Generates setup sheets for NX CAM programs. It is installed by the Install Tools page of the application as a Post Builder event handler together with the post list NX reads.
Installation note: Installed from the Install Tools page. Windows will ask for administrator rights, and NX must be closed during installation.
Cavity Mill Mixed Cutting
Mixed cutting behaviour for cavity milling operations.
Announced. No build is available yet.
Learn moreShow less
A cavity-milling utility. It appears on the Install Tools page as Coming Soon; no build is available yet.
Post Processor
NX post processors, one per machine.
Announced. No build is available yet.
Learn moreShow less
Post processors generated with Siemens Post Builder. A post processor is one product per machine rather than a single download, so the application lists the machines individually: Mitsubishi, Siemens 802D, Siemens 828D and a 4-axis configuration. None of them can be installed yet.
Installation note: Listed per machine in the application. No machine is installable yet.
NX Role Install
Installs a prepared NX role and dialog configuration.
Announced. No build is available yet.
Learn moreShow less
Deployment of a prepared NX role so that a workstation picks up a consistent interface configuration. Announced only; it is not yet listed in the application.
Installed for you
The application finds your NX installation.
One licence
Covers every tool on one computer.
Regular updates
Checked against a SHA-256 hash.
Professional support
Email, answered within 2 business days.
Get all tools with one licence
One licence covers the whole catalogue on one computer. Prices come from the licence server.
View pricingCompatibility
Supported NX versions
A tool is only claimed for an NX version when a build for that version exists.
| NX version | Status | Detail |
|---|---|---|
| NX 12.0 | Supported | The primary target. Every available tool works with NX 12.0. |
| NX 10 | Depends on tool | RenameCAMops, Material Size BOM and NX Backup and Restore work with NX 10. The NX 12 Classic Toolbar and Sheet Up Sheet are built for NX 12.0 only. |
| Other NX versions | Depends on tool | RenameCAMops, Material Size BOM and NX Backup and Restore work with any NX version. Contact support before buying for another tool on another version. |
Not sure what you need? Read the FAQ.